Punching tool change in 20 seconds with 2 knurled screws.Extremely robust punching tools, with operator-changeable punching dies, enable maximum punching performance while simultaneously offering very high operating comfort2 interchangeable punching tools available.At a pitch of 3:1, up to 25 sheets of...
good condition without any damageWorking width: 1600mmMax. material thickness: 80mmConnected load: 9.4kW
good condition without any damage1.200 dpi (equivalent to 3,600 dpi) x 1,200 dpi256 gradations (8 bits)/16.7 million colorsFor formats with a length of less than 279.4 mm / 11" and a width of less than 215.9 mm / 8.5" (e.g. A5 , B5 /)With PF-602 FS-532 w/ RU-50
BOBST SP 104 ER ● 1998 N°0578 044 06 ● Stripping and blanking machine ● Maxi Sheet Size: 720 x 1040mm ● Mini Sheet Size: 350 x 400mm ● Circa 75000h ● Double Sheet Sensor ● Left and right hand pull lays ● Centreline ● Cube computer system ● Motorized suction head ● Quick lock stripping frame ● Automatic feed tray lateral...
● Horizon HT 1000-V automatic trimmer. ● Year 2016 ● Max speed : 1000 books/h ● Max size : 34x30 cm finished ● Full automatic trimmer. ● Automated set-up – The HT-1000V is set-up automatically on the fly by reading a barcode at the entrance of the trimmer. ● The system also is capable of automatic set-up from the operator...
good condition without any damageRoll clean without cuts
Codimag Viva 340 ● Year 2007 ● 4 colors waterless offset ● 1 hot foil stamping unit ● 1 embossing unit ● Camera control ● 5 UV dryers (new lamps) ● 1 rotary die-cutting unit ● rollers changed ● machine in very good condition
Mark Andy LP 3000 ● Year 2008 ● 6 colors flexo ● 6 UV dryers ● perfecting cross ● Camera Control ● 2 x rotary die-cutting units ● very good condition ●
Format max. 905 × 1.110 mmSize of air board 990 × 1,150 mmFormat Palette max 990 × 1.040 mmload capacity max. 600 kg
Stacker Advand PST 48 CSize max.: 950 x 1,162 mmSize min.: 330 x 381 mmPlate thickness: 0,2 - 0,4 mmResolution: 2,540 dpispeed up to 30 plates per hour
Click "Send" or press "Enter" to send your message.
Press [Shift+Enter] to go to a new line.